Greenfield 11 lb Yellow Vinyl Coated Iron Slip Ring Fluke Anchor • 669-11-Y

The Slip-Ring Anchor is a traditional fluke anchor design, with the addition of a sliding ring for easy retrieval. Anchor Chain should always be used with steel fluke anchors, to provide weight necessary to maintain the proper approach angle for setting. Fluke anchors require a scope of at least 5:1 rope length to water depth in order to set properly. 7:1 scope is recommended. The Anchor is retrieved by backing your boat directly over anchor, which allows the ring to slide to the crown and release the anchor from the opposite direction.

• Style: Slip-Ring Fluke Style
• Holding Strength: For Up To 24 Feet Length Boat
• Weight (LB): 11 Pound
• Material: Cast Iron
• Width: 4-1/4 Inch
• Height: 23 Inch
• With Shackle: No
• With Chain: No
• Anchor For Soft And Moderate Conditions Or Structure
• Slip-Ring Anchor Is A Traditional Fluke Anchor Design With The Addition Of A Sliding Ring For Easy Retrieval
• For Light Or Medium Duty
• Chain Should Always Be Used With Steel Fluke Anchors, To Provide Weight Necessary To Maintain The Proper Approach Angle For Setting
• For Less Than 24 Foot Length Boat Size And Wind Up To 30 Knots
• 5:1 To 7:1 Rope Length To Water Depth Scope Needed To Set Anchor Properly