Raymarine ACU-200 Actuator Control Unit • E70099

ACU-200 Actuator Control Unit by Raymarine. The rugged Raymarine ACU-200 Actuator Control Unit delivers reliable autopilot drive power and also provides power to the SeaTalkNG bus.

• Nominal supply voltage 12 V or 24 V
• Operating voltage range 10.8V to 31.2 VDC
• Power Consumption (standby) - Main Power Supply 300 mA (12/24 V)
• Power Consumption (standby) - SeaTalkNG Power Supply 20 mA (12V)
• SeaTalkNG LEN (Load Equivalency Number) 1
• SeaTalkNG Power Out 3 Amp at 12V (fuse protected at 3 Amp)
• Data Connections SeaTalkNG
• Operating Temperature: -20°C to +55°C (-4°F to +131°F)
• Storage Temperature: -30°C to +70°C (-22°F to +158°F)
• Relative Humidity: MAX 93%
• Waterproof rating: Drip resistant
• Dimensions (W x H x D) 285 mm x 211.5 mm x 64.5 mm (11.2 in x 8.3 in x 2.5 in)
• Weight 2.2 kg (4.84 lbs)
• Conformance Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2
• Automagic™ - No lengthy calibration procedures to perform
• No compass calibration required
• Plug and play connections
• Easy to install - Freedom from the restrictions of conventional heading sensors
• EV sensor core can be installed above or below deck. Install upside-down or off the vessel's centre line
• Aerospace technology - 9-axis precision monitoring of pitch, roll, yaw and heading
• Fuel efficient - Evolution autopilots steer so accurately they will save fuel and get you to your destination faster
• Includes: M81105 Rotary Rudder Reference, Sleep switch, Power Drive motor, Drive clutch, Ground