Rule LoPro 900 GPH Automatic Bilge Pump, 12V • LP900S

Our latest automatic pump design, the LoPro allows for pumping out of tight spaces and shallower bilges. The LP900S model uses a unique double system for sensing water, to ensure that the pump only ever operates when water is present, and switches off efficiently when it"™s not. If water is sensed, the pump will spin the impeller as a double check. If water is confirmed, the pump will run to empty the bilges. The pump body rotates to allow discharge in any direction. A selection of straight and 90 degree ports, and a non-return valve for use with straight ports, are supplied.

---

• Type: Automated
• Voltage Rating: 12 Volt DC
• Flow Rate: 900 Gallon Per Hour
• Length: 2.4 Inch
• Width: 2.4 Inch
• Height: 9.3 Inch
• Features Two Automated Modes Of Operation
• High Or Low Water Sensing Mode The Pump Starts When Water Reaches 2 Inch By Turning The Motor Cartridge Upside Down, The Sensor Is At 1.3 Inch
• Electronic Automatic Mode The Pump Automatically Turns On Every 2.5 Minutes To Check For Water, And If It"™s Detected The Pump Stays On Until The Water Is Gone
• Fully Rotating Discharge Body; The Entire Body Swivels Up To 180 Degree, Making The Pump Extremely Easy To Install
• Backflow Prevention; New Tricuspid Check Valves Help Prevent Backflow
• Horizontal Or Vertical Mounting; Feature A Variety Of Mounting Options To Accommodate The Boat"™s Bilge
• Limited 3 Year Warranty