SeaStar Marine Hydraulic Power Assist Steering Unit 12V/24V • PA1200-2

The SeaStar Power Assist PA12002 is a gear pump that is electronically controlled and added to the hydraulic steering circuit between the helm and steering cylinder. The fluid that is circulated by the helm pump enters the power assist and is directed through the gear pump to the steering cylinder(s). The helm serves as the control element for speed and direction, while the P/A serves as the working element that adds power to the steering fluid. The helm pump controls the pump speed, so the faster you turn the wheel, the faster the gear pump will run. When you're not steering, the P/A is stopped, and it only draws standby power.

---

• 150HP+ Single outboards
  
• Heavy 4 stroke outboards
• Twin/Triple Outboards
• Inboards where rudder torque makes wheel effort heavy or uncomfortable

• Dramatically Increases steering comfort
• Reduced wheel effort
• Simplified installation - Simple "add-on" to existing SeaStar manual steering system
• Auto recognize system voltage 12V or 24V
• Number of turns lock to lock remains constant
• Compatible with SeaStar Power Purge System
• Compatible with marine autopilots
• Mounting bracket included - wall or floor mount
• Wiring harness included

• Input Voltage: 12 or 24VDC (Automatically recognized)
• Max PSI Rating: 1000PSI
• Typical Current Draw: ~3 Amps
• Max Current Draw: 50A Max, 60A Peak (1A System electronics)
• Fluid Compatibility: SeaStar Steering Fluid HA5430H or MIL Spec H5606QT
• Harness Length: 15'
• Warranty: 2 Years

• Dimensions Height: 11.1"
• Dimensions Width: 6.2"
• Dimensions Depth: 6.5"
• Weight: 13lbs ~