Xantrex Freedom SW 100 A 12 V DC Input/240 V AC Output 2000 W Inverter/Charger • 815-2012

The second generation 2000 Watts model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is ‘Generator Support Mode’ which enables the Freedom SW to supplement a generator¹ when AC loads exceed the generator’s capacity. The new generation models also feature improved AC transfer or AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 Milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

• Pure sine wave output to operate sensitive electronics
  
• Advanced configuration options for customized applications
  
• Parallel and series stacking capability
  
• Built-in transfer switch automatically transfers between inverter power and incoming AC power
  
• Power factor corrected, multi-stage charger for fast, efficient charging
  
• Temperature compensated charging for a vareity of climate conditions
  
• Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3
  
• Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
  
• Conformal coated circuit boards for humid environments
  
• Dual input / Dual output AC interface for 3000 W model
  
• Ability to charge batteries drained to extremely low voltage
• Output Power (Continuous): 2000 W
• Surge Power: 4000 W
• Output Frequency Regulation: 60 Hz
• Peak output current (Inverter): 55 A
• Output Voltage: 120 V AC
• Output Wave Form: True sine wave
• Efficiency (Full Load): 90%
• No-load power draw (inverting): 3 A DC
• Input DC voltage range: 10-16 V DC
• AC Connections: Single phase in/out
• Output current (continuous at 25°C): 100 A
• Output voltage: 12 V DC
• Output voltage range: 5-16 V DC
• Charge control: 3 stage with manual equalize
• Charge temperature compensation: Remote battery sensor
• Optmial Efficiency: > 85%
• AC Input (Max. Charge): 0.98 typical
• Input current (for maximum charging): 16 A rms nominal
• Input AC voltage: 120 V AC
• Input AC voltage range: 85 - 140 V AC
• Dead battery charge: > 5 V DC
• Compatible battery types: LiFePO4 / Flooded / gel / AGM
• Transfer relay rating: 1 leg of 30 A
• Transfer time (AC to inverter and inverter to AC): < 20 ms
• Optimal Operating Temperature Range: - 4°F to 140°F (- 20°C to 60°C)
• Storage ambient temperature range: - 40°F to 185°F (- 40°C to 85°C)
• Net Weight: 60.5 lb (27.5 kg)
• Unit Dimensions (H X W X L): 7.75" x 13.5" x 15.25" (197 x 343 x 387 mm)
• Safety: ETL listed to CSA 107.1, UL458 and UL458 Marine Supplement (drip shield with product number 808-9004 required) ABYC E-11, A-31, A-32
• EMC: CFR 47, FCC, PART 15, Subpart B, Class B and CAN ICES-3 (B) / NMB-3 (B)
• Limited 2 Year Warranty